PIXMA TS707 / TS707a

Print

Print Head / Ink

Type

Permanent

Number of Nozzles

Total 4,096 nozzles

Ink Cartridges

PG-780 (Pigment Black)
CLI-781 (Cyan, Magenta, Yellow, Black)
[Optional: PG-780XL (Pigment Black),
CLI-781XL (Cyan, Magenta, Yellow, Black)]

Maximum Printing Resolution

4800 (horizontal)*1 x 1200 (vertical) dpi

Print Speed*2 (Approx.)

Based on ISO/IEC 24734
Click here for Summary Report
Click here for Document Print and Copy Speed Measurement Conditions

Document (ESAT/Simplex)

15 / 10 ipm (mono/colour)

Document (FPOT Ready / Simplex)

 8 / 10 sec (mono/colour)

Photo (4 x 6") (PP-201/Borderless)

21 sec

Printable Width

Up to 203.2 mm (8"),
Borderless: Up to 216 mm (8.5")

Printable Area

Borderless Printing*3

Top/Bottom/Right/Left margin: each 0 mm

Bordered Printing

127 x 127 mm:
Top/Bottom/Left/Right margin: 6 mm

89 x 89 mm:
Top/Bottom/Left/Right margin: 5 mm

#10 Envelope/DL Envelope:
Top margin: 8 mm, Bottom margin: 12.7 mm
Left/Right margin: 5.6 mm

LTR/LGL:
Top margin: 3 mm, Bottom margin: 5 mm,
Left margin: 6.4 mm, Right margin: 6.3 mm

Others:
Top margin: 3 mm, Bottom margin: 5 mm,
Left/Right margin: 3.4 mm

Bordered Auto 2-Sided Printing

Top/Bottom margin: 5 mm,
Left/Right margin: 3.4 mm
(LTR: Left: 6.4 mm, Right: 6.3 mm)

Support Media

Rear Tray

Plain Paper
Photo Paper Pro Platinum (PT-101)
Photo Paper Pro Luster (LU-101)
High Resolution Paper (HR-101N)
Photo Paper Plus Glossy II (PP-201, PP-208)
Photo Paper Plus Semi-Gloss (SG-201)
Matte Photo Paper (MP-101)
Envelope
Photo Sticker (PS-208, PS-808)

Cassette

Plain Paper

Multi-purpose Tray

Printable Nail Sticker (NL-101), disc printing

Paper Size

Rear Tray

A4, A5, B5, LTR, LGL, Envelopes (DL, COM10), Square (5 x 5", 4 x 4", 89 x 89 mm), Card Size (91 x 55 mm), 4 x 6", 5 x 7", 7 x 10", 8 x 10"

[Custom size]
width 55 - 215.9 mm, length 89 - 676 mm
*F4 is possible via custom size settings.

Cassette

A4, A5, B5, LTR

[Custom size]
width 148 - 215.9 mm, length 210 - 297 mm
*F4 is possible via custom size settings.

Paper Size (Borderless)
Paper types NOT supported for borderless printing are as follows: Envelope, High Resolution Paper, T-Shirt Transfers

A4, LTR, 4 x 6", 5 x 7", 7 x 10", 8 x 10", Card Size (91 x 55 mm),
Square (5 x 5", 4 x 4", 89 x 89 mm)

Paper Handling (Maximum Number)

Rear Tray (Plain Paper)

A4/LTR = 100, HR-101N = 80

Rear Tray (Photo)

4 x 6" = 20, 5 x 7" = 10

Cassette (Plain Paper)

A4, LTR = 250

Multi-purpose Tray

1 sheet (Manual bypass)

Support Media for Auto 2-sided printing

Type

Plain Paper

Size

A4, A5, B5, LTR

Paper Weight

Rear Tray:

Plain Paper: 64 - 105 g/m2,
Canon specialty paper: Max. 300 g/m2
(Photo Paper Pro Platinum PT-101)

Cassette:

Plain Paper: 64 - 105 g/m2

Ink End Sensor

Dot count

Print Head Alignment

Auto/Manual

Network

Printing Solutions

System Requirements

Please visit https://asia.canon/support to check OS compatibility and to download the latest driver updates

Windows 10 / 8.1 / 7 SP1
(Operation can only be guaranteed on a PC with a pre-installed Windows 7 or later)

Mac OS X 10.10.5 ~ 10.11,
macOS 10.12 ~ 10.14

Chrome OS

General Specifications

Operation Panel

Display

Full dot

Language

32 Languages Selectable:
Japanese / English / German / French / Italian / Spanish / Dutch / Portuguese / Norwegian / Swedish / Danish / Finnish / Russian / Czech / Hungarian / Polish / Slovene / Turkish / Greek / Simplified Chinese / Traditional Chinese / Korean / Indonesian / Slovakian / Estonian / Latvian / Lithuanian / Ukrainian / Romanian / Bulgarian / Croatian / Vietnamese

Interface

USB 2.0

PictBridge (Wireless)

Available

Operating Environment*4

Temperature

5 - 35°C

Humidity

10 - 90% RH (No dew condensation)

Recommended Environment*5

Temperature

15 - 30°C

Humidity

10 - 80% RH (No dew condensation)

Storage Environment

Temperature

0 - 40°C

Humidity

5 - 95% RH (No dew condensation)

Quiet Mode

Available

Acoustic Noise (PC Print)

Plain Paper*6 (A4, Mono)

50.5 dB(A)

Power

AC 100-240 V, 50/60 Hz

Power Consumption (Approx.)

OFF

0.3 W

Standby (scanning lamp is off)
USB connection to PC

 0.9 W

Standby (all ports connected, scanning lamp is off)
[EU only - for ErP Lot 26 regulation]

1.6 W

Time to enter Standby mode
[EU only - for ErP Lot 26 regulation]

10 min 57 sec

Printing*7 (USB connection to PC)

23 W

Duty Cycle

15,000 sheets

Dimensions (WxDxH) (Approx.)

Factory Configuration

372 x 365 x 158 mm

Output/ADF Trays Extended:

372 x 628 x 322 mm

Weight (Approx.)

5.4 kg

Page Yield*8

Plain Paper 
Click here for more information

A4 Colour Documents*9:
CLI-781 (C, M, Y) : 250
CLI-781 BK: 1478*11
PG-780 PGBK: 200


Optional:
CLI-781XL (C, M, Y): 800
CLI-781XL BK: 8162*11
PG-780XL PGBK: 600

Photo Paper (PP-201)
Click here for more information

4 x 6" Photos*10:

Standard:
CLI-781 (C, M, Y) : 98
CLI-781 BK: 240*11
PG-780 PGBK: 1518*11

Optional:
CLI-781XL (C, M, Y): 328
CLI-781XL BK: 892*11
PG-780XL PGBK: 7060*11

  1. Ink droplets can be placed with a pitch of 1/4800 inch at minimum.
  2. Document print speeds are the averages of ESAT (Word, Excel, PDF) in Office Category Test for the default simplex mode, ISO/IEC 24734. Photo print speed is based on the default setting using ISO/JIS-SCID N2 on Photo Paper Plus Glossy II and does not take into account data processing time on host computer. Print speed may vary depending on system configuration, interface, software, document complexity, print mode, page coverage, type of paper used etc.
  3. Paper Type NOT supported for borderless printing are as follows: Envelope, High Resolution Paper, T-Shirt Transfer, Photo Stickers.
  4. The performance of the printer may be reduced under certain temperature and humidity conditions.
  5. For the temperature and humidity conditions of papers such as photo paper, refer to the paper's packaging or the supplied instructions.
  6. Acoustic Noise is measured based on ISO 7779 standard with default setting.
  7. Print: When copying ISO/JIS-SCID N2 (printed by inkjet printer) on A4 size plain paper using default settings.
  8. Page yields may vary depending on content coverage, print settings, temperature, humidity, and frequency of printing.
  9. Declared yield value is in accordance with ISO/IEC 24711 (for A4 size), using ISO/IEC 24712 colour chart. Values obtained by continuous printing.
  10. Declared yield value is in accordance with ISO/IEC 29102, using ISO/IEC 29103 chart. Values obtained by continuous printing.
  11. Estimated supplemental yield. 

Disclaimer
  • To keep printer's performance, Canon printer performs cleaning automatically according to its condition. When the printer performs cleaning, a small amount of ink is consumed. In this case, all colours of ink may be consumed.
    [Cleaning function]
    The cleaning function helps the printer to suck air bubbles or ink itself from the nozzle and thus prevents print quality degradation or nozzle clogging.
  • The repairing parts for printers will be available five years after production is discontinued. Depending on your model, we may ask you to replace it with a new one, or one with almost the same performance as a maintenance service. In this case, it may be that you cannot use supplies or accessories for your model or the compatible OS will be changed.
  • To obtain good printing quality, use up ink within six months after opening.
  • Depending on your terminal, such as a computer or a smartphone, or the operating system of your terminal, such as your computer or smartphone, the estimated ink level information or message displayed on the screen of your terminal may be different from the information or message displayed on the operation panel of the printer. Also, a part of the estimated ink level message displayed on the operation panel of the printer may not be displayed and/or may be displayed at a different point in time. Canon recommends that you use the information and message displayed on the operation panel of the printer as your reference. Note, however, that such information and message are displayed items serve only as a guideline information.
  • Depending on the paper or the print settings, colour ink may be consumed even when you print a document or perform printing in black and white. When any one of the colours of ink has run out, you need to replace the ink cartridge.
  • You need to install ink cartridges of all colours whether you perform black and white printing or colour printing. If any one of the ink cartridges is not installed, an error occurs and you cannot perform printing.
  • When you use the Canon printer for the first time after you install the bundled ink cartridges, the printer consumes a small amount of ink to enable printing by filling the nozzles of the Print Head with ink. For this reason, the number of sheets that can be printed with the first set of ink cartridges is fewer than the succeeding set of ink cartridges.
  • The printing costs described in the brochures or websites are based on the consumption data from not the first ink cartridge but the succeeding ink cartridge.
  • The warranty term for details, contact a Canon authorised sales representative in the country or region you live in.
  • Ink cartridges sold are generally meant for use with printers sold in the same region. The ink cartridges may bear unique labels or configurations and may not be compatible for use with printers sold in another region. To ensure optimal performance of your printer, please check with your local Canon office or authorised Canon reseller before relocating your printer from the location of purchase.
  • Regarding a solution to a problem caused by using non-genuine ink cartridges (including ones supplemented with non-genuine ink by making a hole in the cartridge or so), a fee will be charged even within the warranty term. Keep this in your mind when you use non-genuine ink.
  • If you use non-genuine ink cartridges (including ones supplemented with non-genuine ink by making a hole in the cartridge or so), they may have a negative effect on the performance of the printer or the printing quality may be reduced. In addition, though it is a rare case and does not present a safety hazard, it is reported that a print head will become heated or smoke will be emitted from it due to an ingredient not contained in genuine Canon ink.
    (Note that this does not apply to all non-genuine ink)