imagePRESS C265

主機

類型

A3 彩色多功能文件處理系統

主要功能

打印,影印,掃描,傳送,儲存及另購的傳真功能

處理器

1.8GHz雙核心處理器

控制面版

標準: 25.6cm (10.1吋) TFT LCD WSVGA 彩色平板式觸控面板

記憶體

標準: 5GB RAM

中央處理器: 2GB

圖像處理器: 2GB + 1GB (作圖像處理用途)

硬碟

預設: 250 GB

最大: 1 TB 

界面連接

網絡
標準: 1000Base-T/100Base-TX/10Base-T, 無線網絡 (IEEE 802.11 b/g/n)

選配: NFC, 低功耗藍牙 

其他

標準: USB 2.0 (Host) x2, USB 3.0 (Host) x1, USB 2.0 (Device) x1

選配: Serial Interface, Copy Control Interface 

網路協定

TCP/IP (FTP, SMTP, POP, HTTP, SNMP, LDAP, SLP, SMB, LPD, IPP, WS-Discovery, Bonjour, Direct Mobile Printing, Port9100, SNTP, 802.1X, DHCP, DNS, NTP)

紙張容量 (A4, 80gsm)

標準: 3,550 頁

1,100 頁紙櫃 x 2

550 頁紙盤 x 2

250 頁多功能紙盤

最大: 7,050 頁 (連 POD DECK LITE-C1 或 PAPER DECK UNIT-E1) 

出紙容量 (A4, 80 gsm)

250頁 (連 Copy Tray-R2)

最大: 3,500頁 (連 STAPLE FINISHER-AC1 或 BOOKLET FINISHER-AC1)

最大: 5,000頁 (連 STAPLE FINISHER-AG1 或 BOOKLET FINISHER-AG1) 

釘裝功能

可選配: Collate, Group, Offset, Staple, Saddle Stitch, Hole Punch, Eco Staple, Staple On Demand, Document Insertion, Z-fold, Half-fold, C-fold, Accordion-Z fold, Double Parallel-fold, Trimming.

支援紙材類型

多功能紙盤:

Thin, Plain, Recycled, Colour, Heavy, Coated, Textured, Tracing, Bond, Transparency, Label, Pre-punched, Letterhead, Tab, Envelope

紙櫃 (左/右):

Thin, Plain, Recycled, Colour, Heavy, Tracing, Bond, Transparency, Bond, Pre-punched, Letterhead

紙盤 (上/下): Thin, Plain, Recycled, Colour, Heavy, Bond, Transparency, Pre-punched, Letterhead, Tab1, Envelope2

支援紙材尺寸

多功能紙盤

標準尺寸: SRA3, A3, A4, A4R, A5, A5R, A6R, B4, B5, B5R 
自訂尺寸: 90.0 x 148.0 mm to 330.2 x 487.7 mm

長尺寸: 210.0 x 487.8 mm to 330.2 x 1,300.0 mm3

自由尺寸: 100.0 x 148.0 mm to 330.2 x 487.7 mm

信封: COM10 No.10, Monarch, DL, ISO-C5

自訂信封尺寸: 90.0 x 148 mm to 330.2 x 487.7 mm 

紙櫃 (左/右)

標準尺寸: A4, B5 

紙盤 (上/下)

標準尺寸: SRA3, A3, A4, A4R, A5, A5R, A6R, B4, B5, B5R

自訂尺寸: 139.7 x 182.0 mm to 330.2 x 487.7 mm

信封: COM10 No.10, Monarch, DL, ISO-C5

自訂信封尺寸: 98.0 x 148.0 mm to 330.2 x 487.7 mm  

支援紙材重量

多功能紙盤: 52-350 gsm

紙櫃 (左/右): 52-220 gsm

紙盤 (上/下): 52-256 gsm

雙面: 52-220 gsm 

暖機時間

快速啟動模式:

4秒或更短(直到可以在觸摸屏上執行鍵操作的時間)


開啟裝置: 30秒或更短(直到可以開始影印為止的時間)


睡眠摸式: 30秒或更短 



體積 (W x D x H)

689 x 937 x 1,185 mm

安裝所需空間

基本: 2,026 x 1,524 mm (連 Front door 打開 + 多功能紙盤/ upper-right cover打開 + Buffer Pass M1+ Booklet Finisher- AC1/extension tray & rotary tray延伸)

完全自訂: 2,621 x 1,524 mm (連POD Deck Lite-C1 + Buffer Pass-M1 + Document Insertion Unit-Q1 + Booklet Finisher-AC1/extension tray 延伸)

完全自訂: 5,900 x 1,524 mm (連 Multi Drawer PD-E1 + Stack Bypass Tray-B1 + Buffer Pass-M1 + Insertion Unit-R1 + Paper Folding Unit-K1 + Booklet Finisher-AG1+ Booklet Trimmer G1+ 2-Knife Trimmer-G1 + Trimmer Conveyor-B1/extension tray延伸)

重量

約 261 kg (包含碳粉)

打印

影印

掃描

傳送

傳真

儲存

安全性

打印環境

軟件及打印機管理

Fiery打印控制器

影印托盤

Copy Tray-R2
簡單托盤滿足基本輸出需求
容量: 250 / 100 頁 (單面 / 雙面, 80 gsm)

STAPLE FINISHER-AC1 (外置)

托盤容量 (80 gsm paper):
上托盤:
A4/A5/A5R/B5: 250頁 (80紙)

SRA3/A3/A4R/B4/B5R: 125頁 (80 gsm)
Envelope: 30頁

中托盤:
A4/A5/A5R/B5: 250頁 (80 gsm), SRA3/A3/A4R/B4/B5R: 125頁(80 gsm)
Envelope: 30頁

下托盤:
A4/A5/A5R/B5: 3000頁(80 gsm), SRA3/A3/A4R/B4/B5R: 1500頁 (80 gsm)
A6R: 250頁 (80 gsm)
Envelope: Monarch: 30頁, COM10 No.10, DL, ISO-C5: 100頁

紙張重量:
上/中托盤: 52 to 256 gsm
下托盤: 52 to 350 gsm

釘裝位置: Corner, Double
釘裝容量:
A4/B5: 65頁 (52-90 gsm), A3/A4R/B4: 40頁 (52-90 gsm)
Eco Staple:
A3/A4:
10頁 (52 to 64 gsm)
8頁 (65 to 81.4 gsm)
6頁(82 to 105 gsm)
按量釘裝: 65頁 (52 to 90 gsm)

電源: 從主機
外形尺寸 (W x D x H): 527 (Max 65619) x 623 x 1,099 (Max 1,19519) mm

重量: 約 36 kg

BOOKLET FINISHER-AC1 (外置)

(包括 Staple Finisher-AC1 基本釘裝規格)

騎馬釘紙張尺寸: A3, A4R, B4,

自訂尺寸: 195 x 270 mm to 304.8 x 457.2 mm
騎馬釘紙張重量:
內頁 52-220 gsm, 封面52-256 gsm
釘裝容量: 20 頁 x 10 組(52-81.4 gsm)

非釘裝摺疊容量: 3 頁 (52-105 gsm)
電源: 從主機
外形尺寸 (W x D x H): 527 (最大 65619) x 623 x 1,099 (最大 1,19519) mm

重量: 約 60 kg

FINISHER JOGGER KIT-A1

附在STAPLE FINISHER-AC1或BOOKLET FINISHER-AC1的下托盤

紙張尺寸:
[非排序] A3, A4, A4R, B4, B5, B5R
[排序] A3, A4, A4R, B4, B5

紙張重量:
[非排序] 52-300 gsm
[排序] 52-256 gsm

STAPLE FINISHER-AG1 (外置)
需同時選配 Accessory Interface Kit-A2

上托盤容量:
SRA3/A3/A4/A4R/A5/A5R/A6R/B4/B5/B5R:
1,000 頁 (64-324 gsm), 200 頁 (325-350 gsm)

長紙20 (210 x 487.8 mm 至 330.2 x 762 mm)
100 頁 (52-79 gsm)

下托盤容量:
A4/B5: 4,000 頁

紙張重量: 52-350 gsm
釘裝位置: Corner, Double
釘裝容量 (包括按需釘裝):
A4/B5: 100 頁 (52-80 gsm)
A3/A4R/B4/B5R: 50 頁 (52-81.4 gsm)

電源: 220-240 V, 50-60 Hz, 8A
外形尺寸 (W x D x H): 860 x 792 x 1,239 mm
(When the extension tray is extended)
重量: 約 130 kg

BOOKLET FINISHER-AG1 (外置)
需同時選配 Accessory Interface Kit-A2

(包括 Staple Finisher-AG1 基本釘裝規格)
騎馬釘紙張尺寸: SRA3, A3, A4R, B4,
自訂尺寸 (210.0 x 279.4 mm 至 330.2 x 487.7 mm)
騎馬釘釘裝容量: 25 頁 (52-80 gsm) (包括 1 頁封面)
電源: 220-240V, 50-60Hz, 8A
外形尺寸 (W x D x H): 1,060 x 792 x 1,239 mm (when the extension tray is extended)
重量: 約 180 kg

2/4 HOLE PUNCHER UNIT-A1

Attached inside of either the STAPLE FINISHER-AC1 or BOOKLET FINISHER-AC1
2 or 4 Holes (FRN)
Paper Weight: 52-300 gsm
Paper Size: 2 holes A3, A4, A4R, B4, B5, B5R; 4 holes A3, A4
Power Source: From the finisher

4 HOLE PUNCHER UNIT-A1

Attached inside of either the STAPLE FINISHER-AC1 or BOOKLET FINISHER-AC1
4 Holes (SWE)
Paper Weight: 52-300 gsm
Paper Size: A3, A4, A4R, B4, B5, B5R
Power Source: From the finisher

PUNCHER UNIT-BT1 (2/F4H)

Attached inside of either the STAPLE FINISHER-AG1 or BOOKLET FINISHER-AG1
2 or 4 Holes (FRN)
Paper Weight: 52-300 gsm
Paper Size:
2 holes: A3, A4, A4R, B4, B5, B5R, Custom size (182 x 182 mm to 297 x 432.0 mm excluding 203 x 257 mm to 297 x 270 mm).
4 holes: A3, A4, B4, B5, Custom size (257 x 182 mm to 297 x 432 mm)
Power Source: From the finisher

PUNCHER UNIT-BU1 (S4H)

Attached inside of either the STAPLE FINISHER-AG1 or BOOKLET FINISHER-AG1
4 Holes (SWE)
Paper Weight: 52-300 gsm
Paper Size: A3, A4, B4, B5, Custom size: 257 x 182 mm to 297 x 432 mm
Power Source: From the finisher

Booklet Trimmer-F1

Requires BOOKLET FINISHER-AG1
Paper Size: SRA3, A3, A4R, B4, Custom size: 210.0 x 279.4 mm to 330.2 x 487.7 mm
Paper Weight: 52-220 gsm
Trim Width: 2-28 mm
Chip Tray Capacity: Approx. 5,000 sheets
(Trim width 20 mm, A4, 80 gsm)
Power Source: From the finisher
Dimensions (W x D x H): 1,933 x 794 x 1,044 mm
Weight: Approx. 152 kg
(Attached to the device: width excluding belt conveyer)

DOCUMENT INSERTION/FOLDING UNIT-K1

Requires either the STAPLE FINISHER-AC1 or BOOKLET FINISHER-AC1
Number of Trays: 1
Tray Capacity: 100 Sheets (80 gsm)
Supported Folding Type: Z-Fold, C-Fold
Paper Type: [Z-Fold/C-Fold] Thin, Plain, Recycled, Colour, [Insertion Unit] Thin, Plain, Recycled, Colour, Thick, Letterhead, Bond, Coated, Tab, Textured

Paper Size: [Z-Fold] A3, A4R, B4, [C-Fold] A4R, [Insertion Unit] SRA3, A3, A4, A4R, B4, B5, B5R, 13"x19"
Paper Weight: [Z-Fold/C-Fold] 60-105 gsm, [Insertion Unit] 60-256 gsm

Power Source: 100-240 V, 50/60 Hz, 1.0 A
Dimensions (W x D x H): 247 x 679 x 1,242 mm
Weight: Approx. 76 kg

Document Insertion Unit-R1

Requires either the STAPLE FINISHER-AG1 or BOOKLET FINISHER-AG1
Number of Trays: 2
Tray Capacity: Up to 100 Sheets (with 80 gsm paper)
Upper Tray: Up to 200 sheets
Lower Tray: Up to 200 sheets
Paper Type for Insertion: Thin, Plain, Recycled, Colour, Heavy, Coated, Textured, Bond, Pre-punched, Letterhead, Tab
Paper Size for Insertion: SRA3, A3, A4, A4R, A5, A5R, A6R, B4, B5, B5R
Paper Weight for Insertion: 52-300 gsm
Power Source: 100-240 V, 50/60 Hz, 1.0 A
Dimensions (W x D x H): 336*21 x 793 x 1,407 mm*21
Weight: Approx. 61 kg

Paper Folding Unit-K1

Requires either the STAPLE FINISHER-AG1 or BOOKLET FINISHER-AG1
Supported Folding Type:
Z-Fold, Accordion Z-Fold, C-Fold, Half-Fold, Double Parallel Fold
Paper Type: Thin, Plain, Recycled, Colour, Bond
Paper Sizes:
Z-Fold: A3, A4R, B4,
Accordion Z-Fold/ C-Fold, Half-Fold/ Double Parallel Fold/ Half-Fold:
A4R
Paper Weight:
Z-Fold/ Accordion Z-Fold/ C-Fold/ Half-Fold: 52-105 gsm
Double Parallel Fold: 52-90 gsm
Power Source: From the finisher
Dimensions (W x D x H): 336 x 793 x 1,190 mm
Weight: Approx. 71 kg

Staple Cartridge

Staple-N1 - For stapling (3 x 5,000 pcs) (for STAPLE FINISHER-AG1 or BOOKLET FINISHER-AG1)
Staple-P1 - For saddle stitching (2 x 5,000 pcs) (for BOOKLET FINISHER-AG1)

Staple Cartridge-X1 - For stapling (3 x 5,000 pcs) (for STAPLE FINISHER-AC1 or BOOKLET FINISHER-AC1)
Staple Cartridge-Y1 - For saddle stitching (2 x 2,000 pcs) (for BOOKLET FINISHER-AC1)

  1. 需要 Tab Feeding Attachment-F1。
  2. 需要 Envelope Feeder Attachment-F1。
  3. 需要在 service mode 設定。
  4. A5/A6R (單面)。
  5. 僅支持於網頁打印 PDF。
  6. 需選購 PCL INTERNATIONAL FONT SET-A1。
  7. 需選購 BARCODE PRINTING KIT-D1。
  8. 單面。
  9. 進紙器支援多頁進紙檢測。
  10. A6R 或更小尺寸的可接受重量為 50 至 220 gsm。
  11. 以 A4 傳送。
  12. 以 B4 short傳送。
  13. 需要 uniFLOW Online / uniFLOW.
  14. 參考值: measured by only one unit.
  15. 0.9 W 睡眠模式會受某些設定而影響而不能使用.
  16. 參考值: measured only one unit with ISO7779, described with ISO9296 (2017).
  17. 更改紙張尺寸需聯絡技術服務人員。
  18. 需要 ENVELOPE FEEDER ATTACHMENT-G1。
  19. 當輔助托盤打開時。
  20. 需選購 LONG SHEET TRAY-B1。
  21. 不包括文件托盤的寬度。