When Memory card slot A becomes full, will the recording be automatically saved to Memory card slot B (relay recording)?
Solution
You can activate the relay recording so if the memory you are using becomes full while recording movies, the recording will continue automatically on a memory card.
When recording on memory card A, you can use memory card B for relay recording ( 
).
). Confirm the following information regarding the relay recording settings.
1. Insert a memory card that contains no video recordings into the card slot 
.
.2. Set the mode switch to <M> or <CINEMA>.
3. Turn on the camcorder.
4. Touch [ 
].
].
5. Touch [MENU].
6. Touch [ 
].
].
7. 
Drag your finger up and down bring [ Rec Media for Movies ] into the orange selection bar, 
and touch inside the frame on the right.
Drag your finger up and down bring [ Rec Media for Movies ] into the orange selection bar, and touch inside the frame on the right.
8. Touch [ 
].
].
9. Touch [Relay Recording].
10. Touch [ ].
].
11. Touch [ 
] to close the menu.
] to close the menu.NOTE
- There will be a momentary stop in the scene at the point where the camcorder switches from one memory to another.
- Any of the following actions will deactivate the relay recording function:
- Turning off the camcorder.
- Opening the double memory card slot cover.
- Changing the position of the mode switch.
- Changing the camcorder’s operating mode.
- Changing the memory used for recording movies.