Saving Movies on a Computer
22-Feb-2011
8201028100
Solution
You can use the supplied software, PIXELA’s Transfer Utility SD or VideoBrowser SD, to save the movies recorded in the build-in memory or on an SD card*1 to a computer*2.
*1 Carefully read the information in Note on SDXC Memory Cards before performing the procedure using recordings made on an SDXC memory card.
*2: Windows Only. See System Requirements .
*1 Carefully read the information in Note on SDXC Memory Cards before performing the procedure using recordings made on an SDXC memory card.
*2: Windows Only. See System Requirements .
NOTE
Install the supplied software (Transfer Utility SD or VideoBrowser SD) before you connect the camcorder to the computer for the first time. See the Installing PIXELA Transfer Utility SD/VideoBrowser SD.
1. Power the camcorder using the compact power adapter.
2. Press < 
> to open the movie index screen.
> to open the movie index screen.3. Connect the camcorder to the computer using the supplied USB cable.
Transfer Utility SD or VideoBrowser SD will start up automatically.
NOTE
Camcorder: Select the memory that contains the scenes you want to save.
4. Start Transfer Utility SD or VideoBrowser SD to save movies on the computer.
Follow the on-screen instructions.
For detailed procedures, see Importing video files recorded on the camcorder to a computer using PIXELA Transfer Utility SD/VideoBrowser SD.
IMPORTANT
- When the camcorder is connected to a computer:
- Do not open the memory card slot cover and do not remove the memory cards.
- Do not access, change or delete any of the camcorder’s folders or files directly from the computer as this may result in permanent data loss. Always save your movies on the computer, and restore files to the camcorder, using only the supplied PIXELA’s software.
- Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss.
- Do not open the memory card slot cover.
- Do not disconnect the USB cable.
- Do not turn off the camcorder or the computer.
- Do not change the camcorder’s operating mode.
- When restoring to the camcorder video files that were previously saved to the computer, do not disconnect the USB cable or turn off the camcorder or computer. Doing so may result in scenes that cannot be played back on the camcorder.
- Operation may not work correctly depending on the software and the specifications/settings of your computer.
NOTE
- Also, see the instruction manual of your computer.