23-Jul-2025
0401074502
I have read and understood the disclaimer below
and wish to download the designated software
This firmware (Version 1.1.2) includes fixes for the following issues identified in Version 1.1.0:
1. Fixes an issue where video could not be recorded correctly when using a memory card larger than 2TB with the [Pre-recording] setting enabled.
2. Fixes an issue where the camera failed to operate properly after updating to Firmware Version 1.1.0 if the still photo shooting/movie recording switch function was set to [Silent shutter function switching] or [Disable].
This firmware also incorporates the following changes introduced in Firmware Version 1.1.0:
1. Improves security features. A password must be set initially.
•Adds the ability to review the history of any changes made to the password, network information, or other settings.
*For more information, please refer to the 'Setting a Password' section in the Advanced User Guide on cam.start.canon.
2. Enables firmware updates to be performed when the camera is connected to the internet and new firmware is made available on Canon servers.
3. Adds [Viewfinder Priority] mode, which activates the viewfinder when a user is detected by the rear sensor.
4. Adds the ability to automatically detect Flicker at 100 or 120 Hz during Live View display.
5. Adds the ability to register focus position as a presets on the CR-A100 Camera Remote Application. This ability makes it easier to focus on subjects at the intended distance when the application is used with Robotic Camera System CR-S700R.
6. Adds the ability to select [Panning Assist]. When users pan with compatible lenses, image stabilization and subject blur correction are applied during exposure.
7. Adds the ability to select [Case Special] to expand Servo AF characteristics which is effective for subjects located behind a net in sporting events, such as badminton or volleyball.
8. Adds support for the Software Development Assistance Kit (EDSDK/CCAPI).
9. Adds a function that simultaneously protects images when they are rated.
10. Adds the ability to use up to 8TB of CFexpress cards.
Note
- Cards larger than 8TB require low-level formatting by the camera.
- Cards larger than 8TB are treated as 8TB cards.
- Cards larger than 2TB cannot be used for firmware updating.
11. Adds to lower the image capture frame rate to help prevent overheating when connected to CR-A100 in extended remote shooting.
12. When transferring images with voice memos via FTP, the transfer order priority has now changed with voice memo (Wav) file being sent first followed by image file.
If a voice memo is added to an image queued for transfer, the image and voice memo are now sent last.
13. Adds the ability to set the number of shots captured in pre-continuous shooting mode.
14. Adds the ability to set [Airplane mode] to shooting button customization.
15. Adds the ability to enable [Exposure Simulation] when a flash unit is attached.
16. Improved AF tracking during video capture for subjects that are difficult to focus on.
17. Fixes an issue in which Err70 may occur when enlarging an image after shooting with [Blackout-Free Display] set to "On" and [Servo 1st image priority/One-Shot AF release priority] set to "Release priority".
18. Fixes an issue in which Err70 may occur during Bluetooth communication due to interference from other Bluetooth devices.
19. Fixes an issue in which Err70 may occur when repeatedly shooting in the "High-speed continuous shooting +" mode.
20. Fixes an issue in which Err70 may occur immediately after startup when shooting with the electronic shutter.
21. Fixes an issue in which Err70 may occur during video recording in "FHD239.8P/200.0P".
22. Fixes an issue in which Error 70 may occur while filming in video mode with frame rate set to "50.00P" and [Movie Digital IS] set to "On" or "Enhanced".
23. Fixes an issue in which Err70 may occur during shooting when both [Pre-recording] and [Auto send] to image.canon are set to "Enable".
24. Fixes an issue in which the camera may stop functioning properly when [Image Review] is set to "Off" and the monitor entered low brightness mode after pre-continuous shooting.
25. Fixes an issue in which video recording may not be possible when using Remote Live View shooting in EOS Utility while outputting via HDMI.
26. Fixes an issue in which large RAW image files may not be transferred via Camera Connect.
27. Fixes an issue in which the camera may not connect to Wi-Fi 7-compatible routers.
Contact a support representative regarding use of the Software Development Kit for digital cameras.
If the camera's firmware is already Version 1.1.2, it is not necessary to update the firmware.
Notes:
Users manual in the WEB is updated accordingly. Please download the manual as well as the latest firmware. You can download it from the official WEB site.
Preparations for a firmware update:
After the downloaded compressed file (.zip) is extracted, a firmware folder is created.
*Extracting the downloaded file:
Right-click the zip file, and then select Extract All to extract the file.
In the folder you downloaded are the firmware (EOSR1112.FIR / file size: 268,633,408 bytes) and instructions on the firmware update procedures (a PDF file in five languages: Japanese, English, French, Spanish, and Simplified Chinese). Before starting the firmware update operations, please be sure to carefully review the instructions to confirm your understanding of the firmware update procedures.
(The following is the history of past firmware updates.)
Changes in version 1.0.2:
1. Optimizes the timing of when the warning indicator for the internal camera temperature appears.
2. Fixes an issue that may cause the focus to not be achieved during AF in certain zoom ranges.
Changes in version 1.0.1:
1. The Wi-Fi connection status is now identifiable by the color of the [FTP Transfer Icon].
2. Adds [Protect Images] and [Rating] during FTP Transfer.
3. Adds the ability to change [Custom Shooting Mode] while writing images to the media (BUSY).
4. Fixes an issue in which the camera may become inoperable if a lens that does not communicate with the camera is attached when repeatedly shooting while using HDMI output.
5. Fixes an issue in which the camera may become inoperable if an image is cropped while other images are being transferred to an FTP server.
6. Fixes an issue in which Err70 may occur when using an application software such as Camera Connect, and the load on the smartphone increases.
7. Fixes an issue in which image stabilization may become unstable in movie mode when panning diagonally while using some stabilization rigs (such as monopod or handheld rigs).
8. Fixes an issue in which all images may not be copied when copying multiple selected images in the camera.
9. Fixes an issue in which another manufacturer devices (such as strobe or remote camera trigger) may work during pre-continuous shooting.
10. Fixes an issue that may, immediately after shooting, cause the screen to take a long time to turn off when using a button that has been assigned the "Screen off" function.
11. Fixes an issue in which Look File settings may apply to multiple custom picture files.
12. Fixes an issue in which the AF frame movement may not be smooth when several shooting information items are displayed and the multi-controller is operated.
13. Implements a fix to include custom pictures when saving camera settings.
14. Improves operation stability during network communication.
All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.
Canon Hongkong Company Limited., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.
Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).
You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.
You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.
By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.
