04-Dec-2024
0401019802
I have read and understood the disclaimer below
and wish to download the designated software
Firmware Version 1.1.1 incorporates the following fixes and enhancements:
1. Fixed an issue where externally registered presets were not always saved.
2. Fixed an issue in which the subject was out of focus when the focus position was specified via standard communication from software manufactured by another company. If the focus position specified via standard communication is registered in software from another manufacturer, re-register it after updating the firmware.
Update the firmware from the camera's Settings Page.
For details, refer to the camera's User Manual.
<Firmware file>
- crn100-v111.bin
The firmware contains software modules developed by third parties. The details are available in the download: ReadMe-E.txt, ThirdPartySoftware-E.pdf (Third Party Software) and the license conditions are available in the ThirdPartySoftware folder which is inside the LICENSE folder.
Ver. 1.1.0
1. Adds Lite version of the automatic tracking application. Lite version application has basic features of the automatic tracking application.
2. Enables the ability to adjust Custom Picture [Black: Master Pedestal], [Black: Master Black Red], and [Black: Master Black Blue] more widely.
3. Revises the display of Clear Scan Settings.
4. Adds function for turning [S/N Priority] ON or OFF when [Noise Reduction] is set to [Auto]. When ON, noise reduction is prioritized.
5. Adds function for setting a limit on the range of operation of the pan / tilt.
6. Enables the ability to set zoom and focus speeds in more detail.
7. Enables the ability to make [Speed Level] of Preset setting a finer adjustment at lower speeds.
8. Adds function for color bar output.
9. Adds function for selecting SDI output timecode superposition on or off.
10. Increases the maximum frame rate for USB output.
11. Enables YUV format USB output.
12. Displays the Camera Name set by the user at the top of the settings page.
13. Increases target bit rate limit when using encryption with SRT protocol.
14. Adds function for registering the still thumbnail when a preset memory is registered.
15. Adds function for registering the still thumbnail of the trace start position.
16. Adds function for freeze image during preset moving.
17. Adds Adaptive Bitrate (ABR) function for video delivery over SRT protocol.
18. Adds the option "other than network settings and management information" as restore items
for the backup/restore function. When selected this option, network settings and management information are not saved.
19.Adds Backup/Restore function for Add-On Applications System settings.
20.Fixes minor issues.
Ver. 1.0.1
1. Fixes an issue that caused audio noise during RTMP distribution to the video streaming service.
2. Fixes minor issues.
Windows 10 64bit, Windows 11
macOS 14, macOS 13
Do not turn off the power to the camera while performing the firmware update.
Turning off the camera at this stage may result in disabling its ability to boot correctly.
1. Download the file to any folder.
2. Extract files from a compressed file (ZIP file).
3. For further instructions, refer to Readme in the decompressed folder.
All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.
Canon Hongkong Company Limited., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.
Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).
You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.
You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.
By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.
