20-Sep-2024
0400989802
I have read and understood the disclaimer below
and wish to download the designated software
Firmware Version 1.5.0 incorporates the following enhancements and fixes:
1. Enables functions to be used without limitation in conjunction with the new Battery Pack LP-E6P.
This makes it possible to shoot at the same continuous shooting speed as when using LP-E6NH.
In-camera charging of LP-E6P is also supported.
2. Adds [Protect Images] and [Rating] during FTP Transfer.
3. Adds support for the "Peripheral Coordinated Control". Peripheral Coordinated Control is now always performed when a compatible lens is attached (there is no need to set it on the menu screen).
* Peripheral Coordinated Control is a function that reduces changes in distortion around the periphery of the image caused by camera shake, which tends to occur with wide-angle lenses.
4. The following issues have been fixed.
4-1. Fixes an issue, in which when performing continuous shooting using the electronic shutter with both the [High-Frequency Anti-Flicker Shooting] and [OVF sim. view assist] options set to [On], Err 70 may occur.
4-2. Fixes an issue, in which when Wi-Fi is disconnected, Err 70 occurs.
4-3. Fixes an issue, in which when performing shooting in high-speed continuous shooting + mode with the [Highlight Tone Priority] option set to [ON], focus may not be achieved when certain ISO speed settings are used.
If the camera's firmware is already Version 1.5.0, it is not necessary to update the firmware.
Notes:
Users manual in the WEB is updated accordingly. Please download the manual as well as the latest firmware. You can download it from the official WEB site.
Preparations for a firmware update:
After the downloaded compressed file (.dmg file) is extracted, a firmware folder is created.
*Extracting the downloaded file:
The downloaded folder is automatically extracted, and a firmware folder is created. If the download folder cannot be automatically extracted, double-click the folder.
In the folder you downloaded are the firmware (R6215000.FIR / file size: 74,833,856 bytes) and instructions on the firmware update procedures (a PDF file in five languages: Japanese, English, French, Spanish, and Simplified Chinese). Before starting the firmware update operations, please be sure to carefully review the instructions to confirm your understanding of the firmware update procedures.
(The following is the history of past firmware updates.)
Changes in version 1.4.0:
1. [No. of shots] in [Interval timer] can now be set up to 9999.
2. Adds [FEM] to [Flash C.Fn settings]. Also, adds [ON/ETTL→M] to [Customize buttons]. Enables the ability to set Flash exposure memory (FE memory) from the camera when using Speedlites without an LCD panel.
3. Adds Protect Images During [FTP Transfer] to the camera menu. Images transferred via FTP can now be automatically protected. The user can determine if images have already been transferred via FTP.
4. The following issues have been fixed.
4-1. Fixes an issue that may cause the camera, in rare instances, to experience a delayed restart after the camera has gone into Auto Power Off.
4-2. Enhances security for FTPS (File Transfer Protocol Security) connections.
4-3. Fixes an issue that, under specific circumstances and in rare instances, may prevent the image from being displayed in the viewfinder or on the screen causing the camera to stop operating, or Error Code 70 may be displayed.
4-4. Fixes an issue that may cause the In-Body Image Stabilizer not to initialize when a vibration occurs when the camera is turned on, and Error Code 20 may be displayed.
4-5. Fixes an issue that may result in Error Code 70 being displayed when the user is shooting in A+ Mode or with the camera set to AI Focus AF.
4-6. Fixes an issue that may cause the card access lamp to start flashing and the camera to not operate normally when shooting small subjects.
4-7. Fixes an issue that may cause the camera to continue shooting when the user presses the shutter button and another button at the same time.
Changes in version 1.3.0:
1. Adds support for RF-S10-18mm F4.5-6.3 IS STM lens.
2. Fixes minor issues.
Changes in version 1.2.0:
1. Adds support for the RF5.2mm F2.8 L Dual Fisheye lens.
2. Adds enhanced security when transferring images via FTPS transfer.
3. Adds support for the Software Development Assistance Kit (EDSDK/CCAPI).
4. Fixes minor issues.
Changes in version 1.1.2:
1. Improves the stability of the touch operation control when the [Touch control] is set to [Sensitive].
2. Fixes an issue that may result in only one battery being charged when the BG-R10 Battery Grip is attached.
Changes in version 1.1.1:
1. Adds supports for the Speedlite EL-5.
2. Reduces start-up time when the camera’s Bluetooth setting is enabled.
3. Allows FTP/FTPS/SFTP transfers to be completed when using an IPv6 setting.
4. Fixes minor issues.
All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.
Canon Hongkong Company Limited., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.
Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).
You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.
You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.
By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.
