02-Jul-2024
0400972102
I have read and understood the disclaimer below
and wish to download the designated software
Firmware Version 1.0.9.1 incorporates the following enhancements and fixes:
1.Adds the following size option to the Focus Guide function:
-Normal/Large
2.Enables the following functions to be assigned as options to the Select Dial:
-Shutter
-Iris
-ISO/Gain
-White Balance Mode
-White Balance Mode (K)
-White Balance Mode (CC)
-Select Subject.
3.Enables the Shutter Speed option to be assigned to the Front Control dial, the Rear control dial, and Control Ring.
4.Enables the display of Markers during playback.
5.Enhances security for FTPS (File Transfer Protocol Security) connections.
6.Fixes minor issues.
For further information, please refer to the latest version of the camera's Instruction Manual that is released with the firmware update.
Caution:
- Please use a commercially available SD/SDHC/SDXC memory card that is 512MB or greater to perform the firmware update.
- Firmware version 1.0.9.1 is for updating EOS C70 cameras running firmware version 1.0.0.1 - 1.0.8.1. If your camera's firmware is already version 1.0.9.1, it is not necessary to update the firmware. Once the camera is updated to the latest version, it cannot be restored to a previous version.
- Please refrain from loading menu settings generated using the most recent firmware version to a product running an old firmware version, as doing so may affect camera operations.
Preparations for a firmware update:
- After the firmware update has been performed, the camera's menu settings will be reset. It is recommended that, prior to starting update operations, users save their menu settings as settings data to an SD card, separate from the one that will be used to carry out the update, before starting update operations. This saved data can be loaded into the camera and the settings can be changed after the update has been completed. For further information on this, please refer to the section in the unit's Instruction Manual titled "Saving and Loading Camera Settings."
- The downloaded folder contains the firmware (file name: VQB11.FIR / file size: 65,428,816 byte), and instructions on the firmware update procedures (a PDF file in five languages: Japanese, English, French, Spanish and Simplified Chinese). Before starting the firmware update operations, please be sure to carefully confirm your understanding of these instructions.
Regarding the Software Included in this Firmware:
The software included in this firmware is comprised of software modules developed by both Canon and third parties.
Software Developed by Canon and Free Software:
Software developed or created by Canon and accompanying document is protected by copyright law, terms of an international convention and any other governing laws.
This product uses software modules under copyright by third parties and distributed as free software. Some of these software modules are subject to the GNU General Public License (GPL), GNU Lesser General Public License (LGPL) or any other license.
Display of License Information of Free Software Modules Included in this Firmware:
The license information required to be displayed for the free software modules included with this firmware is saved in the download file. To check the free software module licenses, please refer to the "EOSC70_OSS info.pdf".
Obtaining Source Codes of Free Software:
Some free software modules require the acquisition of the source code in order to distribute the executable form of those software modules. To obtain the source code for the software modules, please refer to the "EOSC70_OSS info.pdf".
The following items are required to perform this firmware update:
1. Camera Body EOS C70
2. A computer
3. SD/SDHC/SDXC memory card with a capacity of 512MB or more (commercially available)
4. An SD card reader/writer (commercially available) or an SD card slot built into the computer
5. A fully charged battery pack for the camera
6. Compact power adapter bundled with the camera
7. The firmware (the downloaded file)
History:
Firmware Version 1.0.8.1
1.The following features are enabled when the following lens is attached: CN-E31.5-95mm T1.7 L S
- Displaying metadata, such as the model name and the focal distance of the lens attached.
- Displaying T number.
- Support for Peripheral Illumination Correction and Chromatic Lens Aberration Correction.
- Support for [Dual Pixel Focus Guide].
2.Adds support for the following RF-Mount Cinema Prime Lenses:
CN-R14mm T3.1 L F
CN-R20mm T1.5 L F
CN-R24mm T1.5 L F
CN-R35mm T1.5 L F
CN-R50mm T1.3 L F
CN-R85mm T1.3 L F
CN-R135mm T2.2 L F
3.The following features are enabled when the following lens is attached: RF24-105mm F2.8L IS USM Z
- Support for aperture ring adjustment.
- Support for zoom operations.
4.Adds support for the Power Zoom Adapter PZ-E2.
5.Adds support for the Canon Multi-Camera Control.
6.Adds support for the RC-IP1000.
7.Adds Digital-Teleconverter function. (1.5x / 2x / 2.5x /3x)
8.Adds [_Proxy] option in XF-AVC proxy media name.
9.Improves Vector Scope.
- Changes to display [BT.2020] in the frame when the color space is set to BT.2020.
- Changes to always display the target color name.
Firmware Version 1.0.7.1
1.The following features are enabled when the following lenses are attached: CN-E14-35mm T1.7 L S:
- Displaying metadata, such as the model name and the focal distance of the lens attached.
- Displaying T number.
- Support for Peripheral Illumination Correction and Chromatic Lens Aberration Correction.
- Support for [Dual Pixel Focus Guide].
2.Enhances Clear Scan resolution.
3.Enables to change WFM size.
4.Enables to change Vector scope gain by touch.
5.Enables to change WFM/Vector scope transparency.
6.Improves AF performance.
- Enables tracking frame to change variably depending on subject.
- Enables to detect heads facing sideways or backwards, or in situations such as when wearing a helmet.
7.Adds [Select Subject] assignable function via control ring/dial.
Firmware Version 1.0.6.1
1. Fixes a problem that was a rare cause of instability in operation when using the control ring of the lens or adapter.
Firmware Version 1.0.5.1
1. The following features are enabled when the following lenses are attached: CN8×15 IAS S/E1,
CN-E20-50mm T2.4 L F, CN-E45-135mm T2.4 L F:
- Displaying metadata, such as the model name and the focal distance of the lens attached.
- Displaying T number
- Support for Peripheral Illumination Correction and Chromatic Lens Aberration Correction.
- Support for Dual Pixel CMOS AF autofocus (CN8×15 IAS S/E1 only)
- Support for [Dual Pixel Focus Guide].
2. The following features are enabled when the following lenses are attached: RF-S18-45mm F4.5-6.3 IS STM, RF-S18-150mm F3.5-6.3 IS STM:
- Adds a menu to switch lens functions. (Focus Ring, Control Ring, Lens Optical Image Stabilization)
3. Adds support for Canon IP [XC Protocol].
4. Enables SD Card recording in XF-AVC 4K Intra setting frame rate 50/60 frames per second.
5. Enables Eye detection.
6. Enables Eye / Face detection and tracking when S&F shooting frame rate is set from 24 to 120 frames per second.
7. Adds support for 4CH display in audio meter.
8. Improves the retention of the recording settings when switching between normal shooting and S&F shooting.
9. Adds [Canon 709 / BT.709] to the Gamma/Color Space in Custom Picture setting.
10. Adds [CMT 709] in LUT and Proxy Rec Color Conversion.
11. Adds [CMT 709] in View Assist.
12. Adds [G Gain] in White Balance in Custom Picture settings.
Firmware Version 1.0.4.1
1. Fixes an issue, in which, in rare instances, the camera cannot be normally operated when operating the REC button with the camera set to the [Continuous Recording] function.
Firmware Version 1.0.3.1
1. Adds support for the Cinema RAW Light recording modes.
Resolution:4096×2160,2048×1080
Bit Depth:12 bit
Frame rate:59.94P,50.00P,29.97P,23.98P,25.00P,24.00P
2. Adds [Frame Recording] modes.
3. Adds [Interval Recording] modes.
Firmware Version 1.0.2.1
1. Adds[EOS Standard]and [EOS Neutral] to the Custom Picture Presets.
2. Adds EF lenses compatible with EF-EOS R 0.71x Mount Adapter.
CN-E14mm T3.1 L F
CN-E20mm T1.5 L F
CN-E24mm T1.5 L F
CN-E35mm T1.5 L F
CN-E50mm T1.3 L F
CN-E85mm T1.3 L F
CN-E135mm T2.2 L F
EF14mm f/2.8L II USM
EF24mm f/1.4L II USM
EF35mm f/1.4L II USM
EF50mm f/1.2L USM
EF85mm f/1.2L II USM
EF135mm f/2L USM
Firmware Version 1.0.1.1
1. Adds ITU-R.BT.709 standard compliant Gamma[BT.709 Standard / BT.709]the to the Custom Picture.
2. Adds [Whole Area] to the AF Frame option so the camera focuses automatically on a subject at the center of the screen.
3. Object or Face Tracking can now be initiated by touching the LCD monitor during 'Whole Area' AF.
4. Adds [2x] option to the Magnification.
5. Adds [Mask 100%] to the [Aspect Marker] and [Safe Area Marker].
6. Adds "B&W during Magn." as an option to the Assistance Function menu.
7. Adds View Assist function to video output from the HDMI OUT terminal.
8. Adds EF lenses compatible with EF-EOS R 0.71x Mount Adapter.
EF16-35mm f/2.8L II USM
EF16-35mm f/4L IS USM
EF24-105mm f/4L IS USM
EF70-200mm f/2.8L IS II USM
EF70-200mm f/2.8L IS III USM
EF70-200mm f/4L IS USM
EF70-200mm f/4L IS II USM
9. Changes to display the AF frame only when operating the AF, while using with EF-EOS R 0.71x Mount Adapter
10. Adds Wi-Fi adapters tested for use with the camera.
ASUS USB-AC68
TP-LINK Archer T9UH
All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.
Canon Hongkong Company Limited., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.
Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).
You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.
You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.
By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.