18-Nov-2024
0400416822
I have read and understood the disclaimer below
and wish to download the designated software
ScanFront 400 system software version 5.7.2410.2203, Administration Tool version 2.4.2024.801, OS version 1.6.12410.23001 and Web Service version 1.5.1.9
Administration tool software allows you to manage multiple ScanFront 400 scanners at a time. You can check the current status of the ScanFront scanners on the network, configure settings, manage users, back-up and restore configuration data.
V5.7
-Complied with the ERP regulations (NW Standby)
-Fix the issue where submission fails when shared folder name are specified with '$' prefix.
-Fixed the issue that ScanFront 400 v5.5 or later cannot send multiple files by FTPS (Explicit).
-Bugs fix
V5.5
-Support FTPS TLS session resumption.
(Fix the issue that the device can not send scanned data via FTPS to FileZilla Server version 1.6.7 or later.)
-Speed up 240dpi scanning (same speed or faster than 300dpi scanning)
-Change the condition for the execution of NTP synchronization, from when the gap is more than 3 mins to less than 30 seconds.
-Fix the JAM issue when users use carrier sheet with the short document.
It does NOT occur to every SF400, and has been already applied to mass production devices.
-Bugs fix
V5.4
-Support viewing with Microsoft Edge
-Bugs fix
V5.3
-Support Windows11
-Bugs fix
-Windows Server 2016(64bit)
-Windows Server 2019(64bit)
-Windows Server 2022
-Windows 10(32bit/64bit)
-Windows 11
-Do not power off during a version update.
-Make sure to back up your scanner data before performing a version update, using the ScanFront Administration Tool which you can download by clicking on the Software tab above.
-Do not operate the scanner until the scanner restarts after the version update is completed.
-Version upgrade may take longer when multiple addresses and job data are registered. Please wait and do not turn the power off while displaying that version upgrade is progressing.
<Firmware Update Procedure>
Step 1: Make sure that no one is using the scanner.
Step 2: Use the Canon ScanFront Administration Tool for SF400 and ensure that the [Status] shows [Connection Possible].
Step 3: Click the [Processing] Menu and select [Version Up...] then [Browse], and specify the update file you have downloaded.
Step 4: Click [Open].
Step 5: Confirm the message that appears, read, then click [OK] to perform the version update.
Step 6: Check that the correct version number is displayed, once the update has been completed.
If the firmware version displayed is not the updated version, please start again at step 1 to complete the procedure. If you are still experiencing any issues, please contact us for further assistance.
For further information on how to complete the firmware update procedure, please refer to Chapter 7 of the User Guide, which you can download by clicking on the Manuals tab.
All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.
Canon Hongkong Company Limited., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.
Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).
You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.
You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.
By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.