20-Nov-2023
0200658602
I have read and understood the disclaimer below
and wish to download the designated software
Canon RAW Plugin for Final Cut Pro is plugin software for importing and editing Canon RAW(CRM) clips with Final Cut Pro, which runs on macOS systems made by Apple Inc.
Changes for Canon RAW Plugin 2.6 for Final Cut Pro :
- Supports Firmware Version 1.0.3.1 or later for the EOS C70.
To use this software, your computer has to meet the following system requirements.
1. Installation Requirements
The following software must be installed on the PC
- Final Cut Pro 10.4.9 or later
2. Supported OSes
Same as the support conditions of Final Cut Pro
3. Compatible PCs
Same as the support conditions of Final Cut Pro
CPU;
Same as the support conditions of Final Cut Pro
GPU;
Required operating environment
- Mac equipped with a GPU (or a built-in GPU) of VRAM 1GB or higher that supports Metal
*The following environment is required to be able to handle 5.5K RAW(CRM), 5.9K RAW(CRM) clips.
- Mac equipped with a GPU (or a built-in GPU) of VRAM 2GB or higher that supports Metal (except for NVIDIA GPU)
*The following environment is required to be able to handle 8K RAW(CRM) clips.
- Mac equipped with a GPU (or a built-in GPU) of VRAM 4GB or higher that supports Metal (except for NVIDIA GPU)
Recommended operating environment
- iMac Pro equipped with AMD Radeon Pro Vega 64
RAM;
Same as the support conditions of Final Cut Pro
4. Display
Same as the support conditions of Final Cut Pro
5. Supported Models
EOS C70 (Firmware Ver.1.0.3.1 or later), EOS C500 Mark II, EOS C300 Mark III, EOS C200, EOS C200B, EOS R5 C, EOS-1D X Mark III, EOS R3, EOS R5
Clips in formats other than RAW(CRM) are not supported.
Please refer to the instructions below on how to download and install the software.
Exit all other applications when installing this software.
1. Check that the Final Cut Pro 10.4.9 or later is installed.
2. Download "rpfm-2-6-0-5-9l.dmg.gz" from the download page.
3. Extract "rpfm-2-6-0-5-9l.dmg.gz" on the computer to generate "rpfm-2-6-0-5-9l.dmg".
4. Double-click "rpfm-2-6-0-5-9l.dmg", and double-click the "RPFMInstaller" file in the automatically-mounted disc image "rpfm26".
5. Follow the on-screen instructions to complete the installation.
All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.
Canon Hongkong Company Limited., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.
Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).
You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.
You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.
By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.